LoRa Mesh Controller
2
3
4

LoRa Mesh Controller

The new single lamp controller is a light-controlled street lamp that can control the switch of the street lamp through the detection of ambient brightness. To a certain extent, it realizes the automatic switch of the lamp and reduces the cost of human management.

Send Inquiry

Product Introduction

Loramesh Node Controller

The original wireless single lamp controller of our company adopts an aluminum shell and is installed in the electrical compartment of the lamp. Due to the small electrical compartment of many lamps, there are often problems that the controller cannot be put in, and the installation of the antenna has always been very troublesome. After hard work, our company has successfully developed a new type of wireless single light controller, which fully complies with ANSI C136.41 road and area lighting equipment standards, and can directly replace the original light controller.

Parameters

Model Name			XL J11PN2-RF-XXX

Max. Power Consumption			1.3 W
Input Voltage			100-277V
Frequency			50/60Hz
RF			ISM Band433/470/868/915 MHz
Modulation			FSK/LoRa/OOK
Receiver Sensitivity			-142dBm@SF=12, BW=125HZ
			-136dBm@SF=10, BW=125HZ
			-126dBm@SF=7, BW=125HZ
RF Tx Power			Max +18 dBm
Network			Mesh >500m each Hop
Max Hop			7
Max Load			1000W
Antenna Gain			2 dBi
Dimming Interface			DAC 0-10V
Connectors (In/Out)			Leads 5P, NENA Socket
Housing			Solid plastic case, IP66
Weight			0.3 kg
Surge Protection			10 kV
Size (L x W x H)			Ø94x97mm
Weight			0.3 kg
Operating Temperature			-40°C ~ 85°C
Certificate			CE-RED, FCC

Functions of the Lora node controller:

1. Wireless communication capability

Lora node controller uses wireless communication technology to transmit data and commands over long distances.

2. Long battery life

Lora node controller uses low power consumption technology and therefore has long battery life.

3. Multiple sensor support

Lora node controller can connect to a variety of sensors, such as temperature, humidity, air pressure, light, etc., to collect environmental data.

4. Remote control and monitoring

Lora node controller can perform remote control and monitoring through the Internet, such as turning on and off lights, adjusting light and dark, etc.

5. Data storage and processing

Lora node controller can store and process the collected data and provide real-time data and historical data query.

6. Security

Lora node controller supports secure encrypted communication to ensure the security of data transmission.

7. Scalability

Lora node controller can be connected with other IoT devices to achieve more complex control and monitoring tasks.

In short, Lora node controller can be used in various application scenarios, such as smart home, smart agriculture, environmental monitoring, industrial automation, etc. It can improve production efficiency, save energy costs, and bring people a more comfortable and convenient life experience.

Loramesh Node Controller - A reliable, full-featured smart solution

Loramesh node controllers are the ideal choice for modern intelligent control systems with their superior quality and comprehensive functions. We are committed to providing node controllers with high reliability and performance to meet various application requirements.

Reliable quality

Loramesh node controllers use advanced technology and strict production processes to ensure that each product has excellent reliability. We use multi-level testing and quality control to ensure its stability and long-term durability in various environments.

Complete functions

The node controllers we provide have rich functions, including real-time data monitoring, remote control and automated management. These functions not only improve the intelligence level of the system, but also significantly improve the convenience and efficiency of operation.

Customizable on request

In order to meet the specific needs of different customers, Loramesh node controllers support function customization. Whether it is special interface requirements or specific control logic, we can carry out personalized design and adjustment according to the specific needs of customers.

LoRa Smart Wireless Node

Central Management Software (CMS)

(Using a user name and password, you may access the Smart Central Management System from any device that has a web browser, such a desktop computer, laptop, tablet, or smart phone. An intuitive and user-friendly experience is provided by the responsive interface, which adjusts to the size of the screen.)

Honor and qualification

Official certification, professional after sales service.

IP66 Certificate-Concentrator

IP67 Certificate Node Controller

CE-EMC Certificate

CE-LVD Certificate

LVD Certificate

After-sales service:

Warranty period: Lora node controllers usually provide a certain warranty period. During this period, if there are quality problems with the equipment, the manufacturer will be responsible for repairing or replacing it.

Technical Support: Vendors often provide technical support, including assistance with equipment installation, configuration, and troubleshooting.

After-sales consultation: If you encounter problems while using the Lora node controller, you can consult the supplier and obtain relevant solutions or suggestions.

Repair and replacement: Outside the warranty period or within the scope of non-warranty, the supplier may provide repair services and charge corresponding fees according to the specific circumstances. The supplier may also offer the option of replacing the device if it cannot be repaired.

Firmware Updates: Vendors may periodically provide firmware updates to improve device performance, add new features, or fix known issues

FAQ

Q: What are the main functions of the Loramesh smart lighting control system

A: The Loramesh node controller provides multiple functions such as real-time data monitoring, remote control, and automated management, supporting efficient and intelligent system management.

Q: Does the product support customization?

A:Yes, our node controller supports functional customization according to the specific needs of customers, including adjustments in interfaces, control logic, etc.

Q: How to ensure the quality and reliability of the product?

A: We adopt strict production processes and multi-level quality control processes to ensure the stability and long-term durability of each product in various environments.

Q: Is the installation and configuration of the node controller complicated?

A: Our node controller design focuses on user-friendliness, providing detailed installation guides and configuration instructions to make the installation and commissioning process as simple as possible.

Q: Does the node controller support remote monitoring?

A: Yes, the Loramesh node controller supports remote monitoring, and users can view data and perform control operations in real time through the network.

Q: How to get technical support or after-sales service?

A: We provide professional technical support and after-sales service. Customers can get help through our official website or customer service hotline, and we will do our best to solve your problems.

Street Light Controller NEMA

No Information