LoRa Smart Street Light Controller
2
3
4

LoRa Smart Street Light Controller

The wireless node controller provides load control (on/off) and luminaire dimming function. It is installed inside the housing of each luminaire and is controlled by the concentrator via RF 433/865/868/915MHz.

Send Inquiry

Product Introduction

Loramesh Outdoor smart Lighting System

LoRa MESH is an ad hoc network communication protocol based on LoRa technology. Using LoRa wireless communication technology, multiple devices are formed into a self-organizing network to form a mesh topology to realize the interconnection between devices. It has both the advantages of LoRa technology and the characteristics of Mesh ad hoc network.

Advantages

Ad hoc network features: LoRa MESH networks have the characteristics of self-organizing networks, which can automatically build and maintain networks. When a device joins or leaves the network, the network automatically adjusts the topology to ensure the stability of data transmission. This ad hoc networking feature makes LoRa MESH networks highly flexible and scalable.

Multi-hop transmission: The LoRa MESH network adopts a multi-hop transmission method, and data can be forwarded through multiple nodes and finally reach the destination node. This multi-hop transmission mode can effectively extend the communication distance, improve the signal penetration ability, and reduce the communication pressure of a single node.

High capacity : Multi-hop communication improves the capacity and reliability of the network, and even if a node fails, data can still be transmitted through other paths. Therefore, LoRa MESH has a high capacity and can support the access of a large number of devices. This makes LoRa MESH networks very suitable for large-scale IoT scenarios, such as smart cities, smart agriculture, etc.

Wide range of applications: LoRa MESH network can be widely used in smart home, industrial sensors, wireless alarm security systems, building automation solutions, smart agriculture and other application scenarios due to its characteristics of automatic network construction and support for large-scale device access.

Parameters

Model Name			XL J11PN2-RF-XXX

Max. Power Consumption			1.3 W
Input Voltage			100-277V
Frequency			50/60Hz


RF			ISM Band433/470/868/915 MHz
Modulation			FSK/LoRa/OOK
Receiver Sensitivity			-142dBm@SF=12, BW=125HZ
			-136dBm@SF=10, BW=125HZ
			-126dBm@SF=7, BW=125HZ
RF Tx Power			Max +18 dBm

Network			Mesh >500m each Hop

Max Hop			7
Max Load			1000W

Antenna Gain			2 dBi


Dimming Interface			DAC 0-10V

Connectors (In/Out)			Leads 5P, NENA Socket

Housing			Solid plastic case, IP66

Weight			0.3 kg
Surge Protection			10 kV
Size (L x W x H)			Ø94x97mm
Weight			0.3 kg
Operating Temperature			-40°C ~ 85°C

Certificate			CE-RED, FCC

Features

01/

LoRa MESH: The coverage of the entire MESH network is greatly enhanced by using advanced LoRa modulation.

02/

Ultra-large network capacity: Up to 65,535 networks can theoretically exist.

03/

Decentralization: Only two types of nodes, terminal and routing nodes, make up the entire network, and no coordinator or central node is needed to participate in network management.

04/

Automatic routing: Each routing node can automatically establish a connection with the surrounding nodes when it receives a data request, eliminating the need for a coordinator to assist in path planning.

05/

Network self-healing: After many tries at communication, the routing node re-establishes a fresh path in the event of a connection failure.

06/

Additional features include encrypted communication, multiple verification, avoidance mechanisms, multi-level routing, path optimization, and remote configuration.

Test Standard

" EN 62311

" EN 61347-1

" EN 61347-2-13

" ETSI EN301 489-1/-3

" ETSI EN300 220-1/-2

Product Images

The interface for the base and single light controller according to ANSIC136.41 is depicted in the image

Demension

The figure below shows the structure and size of the single lamp controller

Central Management Software (CMS)

(With a user name and password, you can use any web-enabled device-a desktop computer, laptop, tablet, or smartphone-to access the Smart Central Management System. An intuitive and user-friendly experience is provided by the responsive interface, which adjusts to the size of the screen.)

Honor and qualification

Official certification, professional after sales service.

Certificate name

UNIA21091319EC-11 LORA EMC Test Certificate_00(1).jpg

Certificate name

IP66 Certificate-Concentrator-BERSN_00(1).jpg

Certificate name

IP67 Certificate-Node Controller-BERSN_00(1).jpg

Certificate name

IP66 TEST REPORT-LED STREET LIGHT-BERSN_00.jpg

Certificate name

FAQ

Q: What is an outdoor street light intelligent control system?

A: The outdoor street light intelligent control system is a system that realizes remote monitoring and intelligent control of outdoor street lights through advanced sensors, intelligent controllers and network communication technology. It can automatically adjust the brightness of street lights based on ambient lighting, traffic flow and other data to improve energy efficiency and reduce energy consumption.

Q: What impact does the intelligent control system have on energy consumption?

A: The intelligent control system can intelligently adjust the brightness of street lights according to actual needs, such as reducing the brightness during low peak periods at night and increasing the brightness during peak periods, thereby reducing unnecessary energy consumption.

Q: How does the intelligent control system respond to emergencies?

A: Intelligent control systems are usually equipped with a fault alarm function. Once a street light fails or is abnormal, the system will automatically send an alarm. In addition, the intelligent control system can also realize remote diagnosis and maintenance, reducing the need for manual inspections.

Q: Do I need to replace the existing street lighting facilities?

A: Most intelligent control systems are compatible with existing street lighting facilities and do not require large-scale replacement. The installation of intelligent control systems is usually modified and upgraded on the original basis to achieve remote intelligent control.

Q: What benefits does the outdoor smart control system bring to urban management?

A: Intelligent control systems can improve the energy efficiency of street lights, reduce maintenance costs, and can achieve centralized management and monitoring, providing more data support to urban management departments and helping them optimize urban lighting layout and energy conservation and emission reduction work.

Q: Is the smart control system applicable to different types of street lights?

A: Intelligent control systems can usually be applied to various types of street lights, including traditional high-pressure sodium lamps, LED street lights, etc. The system will perform corresponding regulation and management according to different types of street lights.

LoRaMESH Wireless Gateway

LoRa Smart LED Driver