WiZ Pro Controller
WiZ RGBTW Controller I 12-24V
BS-WIZCV1224-180/RGBTE
BERSN WIZ Pro LED controller series is a RGBTW five-color intelligent dimming controller dedicated to LED lighting. It adopts advanced computer control chip and the most advanced PWM (pulse width modulation) digital brightness adjustment technology. It can be used by RF remote control and mobile phone WIZ APP. Dimming.
Features
• PWM dimming method with mutiple channel outputs
• Perfect for both built-in and standalone
• A 10% accuracy energy metering feature
• Max 180W output load
• Wi-Fi + Bluetooth dual protocol module which enable local Bluetooth messages for installation and connectivity to WiZ cloud over Wi-Fi network
Applications
• Interior decoration: hotels, shopping malls, homes, etc.
• Other places where RGB CW led lights can be used.
Electrical Data
|
Item |
WiZ RGBTW Controller I 12-24V |
|
Model No. |
BS-WIZCV1224-180 |
|
Rated input voltage |
12…24Vdc |
|
Rated input current |
7.5A @ Max output power |
|
Max input power |
180W @ Max output power /@ Max Rated input voltage |
|
Rated output current |
7.5A max total ;3.75A max per channel |
|
Standby power |
<0.5W @ Rated input voltage |
|
ESD |
4KV @ HBM, 8KV @ air |
|
Dimming method |
PWM, 2KHz |
|
Dimming range |
0-100% |
|
Ambient temperature |
-20…+50ºC |
|
Tcase-life |
75ºC |
|
Lifetime |
50,000 hrs |
|
Mains switching cycles |
100,000 Cycles |
|
Connection |
Wi-Fi IEEE802.11 b/g, BLE 4.2 |
|
Audible noise |
<24 dB @ 5cm |
|
Ingress Protection |
IP20 |
|
Approval Marks |
CE-RED |
All specififications are typical and at 25°C Tcase unless otherwise specifified.
RF Interface
|
Communication method |
Wifi + BLE |
|
Wifi Frequency |
2400-2483.5 Mhz (IEEE Std 802.11 b/g) |
|
Wifi Transmission power |
20dbm Max |
|
BLE Frequency |
2400-2483.5 Mhz |
|
BLE Transmission power |
3dbm Max |
|
Wifi channel |
1...13 |
Push Button
|
Push button |
Tact switch, for pairing and factory reset |
|
Notes: 1) Press for under<2 s and release: product does a soft reboot 2) Press for 2s < < 10s and release: product goes into forced pairing mode, outputs dimming variations 3) Press for 10s< and release: reset to factory settings (forgets favorites and Home ID) and reboots |
|
Wiring and Connections
|
Input Wire Type |
1.5 mm2 |
|
Output Wire Type for RGBTW negative |
1.0 mm2 |
|
Output Wire Type for RGBTW Positive |
1.0 mm2 |
|
Wire Length |
130 mm (+/- 5mm) |
|
Wire Strip Length |
10 mm (+/- 5mm) |
Example of Connection
1. Cut the power supply wires off.
2. Fix the item by inserting accessory screws into the u-shaped groove on both sides.
3. Following instructions of silk print on the housing of bridge, then plug the output wires into LED light strip input connectors.
4. Plug the input positive and negative wire of the bridge into SELV constant voltage driver output connectors.
Pin Definition
|
A -R (-) - Black |
Output: R LED Strip |
|
B - G (-) - Black |
Output: G LED Strip |
|
C - B (-) - Black |
Output: B LED Strip |
|
D - CW (-) - Black |
Output: CW LED Strip |
|
E - WW (-) - Black |
Output: WW LED Strip |
|
F - Vo (+) - Red |
Output: LED Strip V+ |
|
G - in(-) - Black |
DC Power supply negative input |
|
H - Vin (+) - Red |
DC Power supply positive input |
Dimensions & Weight
|
Dimensions LxWxH |
89x40x29mm |
|
Color |
White |
|
Weight |
57 g |
WIZ App Installation
1). Download it free by Google Play
2). Install by QR Code: use QR scan app to scan QR code, then download and install it.
3). Down it free in App store or Android store: App store search WIZ CN V2.
Previous
RGB CCT LED ControllersNext
No InformationYou Might Also Like
Send Inquiry