RGB CCT LED Controllers
WiZ RGBTW Controller I 12-24V
BS-WIZCV1224-180/RGBTW
WiZ-connected BERSN RGB CCT LED controllers can interact with constant voltage. This controller is designed for low voltage (12-24V) light, such as 12v led strip light, 12v panel light etc. After installation and settings, your phone (Apple system or Android system) can control light directly.
Electrical Data
|
Item |
WiZ RGBTW Controller I 12-24V |
|
Model No. |
BS-WIZCV1224-180 |
|
Rated input voltage |
12…24Vdc |
|
Rated input current |
7.5A @ Max output power |
|
Max input power |
180W @ Max output power /@ Max Rated input voltage |
|
Rated output current |
7.5A max total; 3.75A max per channel |
|
Standby power |
<0.5W @ Rated input voltage |
|
ESD |
4KV @ HBM, 8KV @ air |
|
Dimming method |
PWM, 2KHz |
|
Dimming range |
0-100% |
|
Ambient temperature |
-20…+50ºC |
|
Tcase-life |
75ºC |
|
Lifetime |
50,000 hrs |
|
Mains switching cycles |
100,000 Cycles |
|
Connection |
Wi-Fi IEEE802.11 b/g, BLE 4.2 |
|
Audible noise |
<24 dB @ 5cm |
|
Ingress Protection |
IP20 |
|
Approval Marks |
CE-RED |
All specififications are typical and at 25°C Tcase unless otherwise specifified.
Features
• PWM dimming method with 5 mutiple channel outputs
• Ideal for both standalone and built-in
• Energy metering technology with a 10% accuracy
• Max 180W output load
• Wi-Fi + Bluetooth dual protocol module which enable local Bluetooth messages for installation and connectivity to WiZ cloud over Wi-Fi network
RF Interface
|
Communication method |
Wifi + BLE |
|
Wifi Frequency |
2400-2483.5 Mhz (IEEE Std 802.11 b/g) |
|
Wifi Transmission power |
20dbm Max |
|
BLE Frequency |
2400-2483.5 Mhz |
|
BLE Transmission power |
3dbm Max |
|
Wifi channel |
1...13 |
Push Button
|
Push button |
Tact switch, for pairing and factory reset |
|
Notes: 1) Press for under<2 s and release: product does a soft reboot 2) Press for 2s < < 10s and release: product goes into forced pairing mode, outputs dimming variations 3) Press for 10s< and release: reset to factory settings (forgets favorites and Home ID) and reboots |
|
Wiring and Connections
|
Input Wire Type |
1.5 mm2 |
|
Output Wire Type for RGBTW negative |
1.0 mm2 |
|
Output Wire Type for RGBTW Positive |
1.0 mm2 |
|
Wire Length |
130 mm (+/- 5mm) |
|
Wire Strip Length |
10 mm (+/- 5mm) |
Example of Connection
1. Unplug the power supply lines.
2. Use accessory screws to fix the product through the u-shaped groove on both sides.
3. Plug the output wires into the LED light strip input connectors after following the silk print instructions on the bridge's housing.
4. Connect the bridge's positive and negative input wires to the SELV constant voltage driver output connectors.
Pin Definition
|
A -R (-) - Black |
Output: R LED Strip |
|
B - G (-) - Black |
Output: G LED Strip |
|
C - B (-) - Black |
Output: B LED Strip |
|
D - CW (-) - Black |
Output: CW LED Strip |
|
E - WW (-) - Black |
Output: WW LED Strip |
|
F - Vo (+) - Red |
Output: LED Strip V+ |
|
G - in(-) - Black |
DC Power supply negative input |
|
H - Vin (+) - Red |
DC Power supply positive input |
Dimensions & Weight
|
Dimensions LxWxH |
89x40x29mm |
|
Color |
White |
|
Weight |
57 g |
WIZ App Installation
1). Google Play offers a no-cost download.
2). Using a QR code scanner app, download and install the software to install through QR code.
3). Down it free in App store or Android store: App store search WIZ CN V2.
FAQ
Q：Does WiZ work with Bluetooth?
A:Since 2019, almost all WiZ products include Bluetooth. Using Bluetooth during pairing makes it quicker and more reliable, and allows you to connect your lights in just a few seconds.
Q: How do WiZ connected lights work?
A: WiZ is a connected lighting system. WiZ lights are set-up through your Wi-Fi network and can be controlled with the WiZ application on your iOS or Android phone/tablet, with the WiZmote remote control, portable button or with your traditional power switch thanks to the WiZclick feature.
Q: Is WiZ owned by Philips?A: Philips Hue and WiZ are both owned by Signify, meaning a lot of similarities naturally pop up between the two brands. Whilst WiZ is known for being cheaper, it still causes confusion whether the quality differs between the two, and whether there's one brand that smart home enthusiasts should stick with.
Q: Is WiZ compatible with HomeKit?
A: Smart lighting company WiZ has rolled out Matter support to its smart bulbs, lamps, and plugs, making them compatible with Apple Home for the first time (via HomeKitNews).
You Might Also Like
Send Inquiry