PLC Concentrator
A method for remote control and status data transfer via AC power lines was created by BERSN and is known as the PLC Smart Lighting Control System.
One concentrator (gateway) may communicate with many node controllers thanks to PoLINE. Because each node has a distinct number, the concentrator (gateway) may address each node separately. By regularly polling nodes for their state and issuing directives to a single node, a group of nodes, or the entire network, the gateway also establishes a network of nodes linked to the same power line.
Characteristics
* Scenarios may be scheduled and controlled remotely in real time.
* The integrated GSM/GPRS/LTE 4G modem enables complete administration.
* Control for each phase independently.
* Individual control of electricity lines via a PLC node controller.
* Detection and timely notification of electrical issues.
Specification
Model Name | SLGJ2-IPLC | ||||
Standby Power | <5W | ||||
Input Voltage | 3×220/380V±20% | ||||
Frequency | 50/60Hz | ||||
Communication | LTE 4G / PLC | ||||
PLC Frequency Point | 131.58/ 263.16/ 312.5/ 416.67kHz | ||||
Modulation | BPSK/DSSS | ||||
Serial interface | RS-485 | ||||
PLC Communication Speed | 5.48k/ 783bps/ 87bps | ||||
Number of phases | 1~3 | ||||
Surge Protection | 10 kV | ||||
Mounting | DIN-rail in the power cabinet | ||||
Dimension | 290x180x95mm | ||||
Material | Plastic | ||||
IP | 20 | ||||
Weight | 3 kg | ||||
Operating Temperature | -40°C ~ 70°C | ||||
Certificate | CE |
Dimension
Installation
Wiring
SMART Lighting Control System PLC l Functions
You Might Also Like
Send Inquiry