RGBTW DC Controller Connected By WiZ
RGBTW DC Controller Connected by WiZ I 12-24V
BS-WIZCV1224-180/RGBTW
Smart Wi-Fi LED lighting brings more convenience to your daily life. This smart wireless DC controller provides soft white light and colorful RGBTW, which can be adjusted to the desired brightness through the app or voice. A smart controller that really fits your everyday activities. Can be used with WiZ.
Features
• PWM dimming method with mutiple channel outputs
• Ideal for both standalone and built-in
• An energy metering feature with a 10% accuracy
• Maximum output load of 180W
• A Wi-Fi + Bluetooth dual protocol module that enables local Bluetooth messages for setup and WiZ cloud connectivity
Applications
• LED Strip Light
• RGBCW application
Electrical Data
|
Item |
WiZ RGBTW Controller I 12-24V |
|
Model No. |
BS-WIZCV1224-180 |
|
Rated input voltage |
12…24Vdc |
|
Rated input current |
7.5A @ Max output power |
|
Max input power |
180W @ Max output power /@ Max Rated input voltage |
|
Rated output current |
7.5A max total; 3.75A max per channel |
|
Standby power |
<0.5W @ Rated input voltage |
|
ESD |
4KV @ HBM, 8KV @ air |
|
Dimming method |
PWM, 2KHz |
|
Dimming range |
0-100% |
|
Ambient temperature |
-20…+50ºC |
|
Tcase-life |
75ºC |
|
Lifetime |
50,000 hrs |
|
Mains switching cycles |
100,000 Cycles |
|
Connection |
Wi-Fi IEEE802.11 b/g, BLE 4.2 |
|
Audible noise |
<24 dB @ 5cm |
|
Ingress Protection |
IP20 |
|
Approval Marks |
CE-RED |
All specififications are typical and at 25°C Tcase unless otherwise specifified.
RF Interface
|
Communication method |
Wifi + BLE |
|
Wifi Frequency |
2400-2483.5 Mhz (IEEE Std 802.11 b/g) |
|
Wifi Transmission power |
20dbm Max |
|
BLE Frequency |
2400-2483.5 Mhz |
|
BLE Transmission power |
3dbm Max |
|
Wifi channel |
1...13 |
Push Button
|
Push button |
Tact switch, for pairing and factory reset |
|
Notice 1) Press and release for less than 2 seconds: product soft restart 2) Press for 2 seconds << 10 seconds and release: product enters forced pairing mode, output dimming changes 3) Press for 10 seconds < then release: reset to factory settings (forget favorites and homepage ID) and restart |
|
Wiring and Connections
Example of Connection
1. Disconnect the power supply lines.
2. Use accessory screws to fix the product through the u-shaped groove on both sides.
3. Connect the output wires to the input connectors for the LED light strip by adhering to the silk-screened instructions on the bridge housing.
4. Connect the bridge's input positive and negative wires to the output connectors of the SELV constant voltage driver.
Pin Definition
|
A -R (-) - Black |
Output: R LED Strip |
|
B - G (-) - Black |
Output: G LED Strip |
|
C - B (-) - Black |
Output: B LED Strip |
|
D - CW (-) - Black |
Output: CW LED Strip |
|
E - WW (-) - Black |
Output: WW LED Strip |
|
F - Vo (+) - Red |
Output: LED Strip V+ |
|
G - in(-) - Black |
DC Power supply negative input |
|
H - Vin (+) - Red |
DC Power supply positive input |
Dimensions & Weight
|
Dimensions LxWxH |
70x45x25mm |
|
Color |
White |
|
Weight |
57 g |
WIZ App Installation
1). Download it free by Google Play
2). Install by QR Code: use QR scan app to scan QR code, then download and install it.
3). Free download from the Android or Apple app stores search for apps WIZ CN V2.
How do I get my WiZ light to work?
Manually triggering pairing mode
To trigger it, you need to turn ON your light 3 times in a row with the power switch, with 1-2 seconds between each ON. Then your light will start to pulse in blue (color light) or cool white (tunable white light). It is ready to be added to your Home in your WiZ application.
Previous
No InformationNext
RGBTW ControllerYou Might Also Like
Send Inquiry